TIM’s Memory Monday (No: 41)

If I have calculated correctly then I have three more Memory Monday posts to put up before I move on to Dio-Bolical Monday.  Hopefully in that time the remaining bits and bobs will turn up so that I can get started on the two projects I have planned.  Right now the absense of bases is causing me the greatest concern as they are literally the foundations of each build.  Fingers crossed they arrive soon.

In the meanwhile this post is of the iconic Willy’s Jeep and is very rare in my collection as it is a plastic kit and not a metal one! 

TIM 

 —000—

WW Rubicon 28mm Willys Jeep – (The April Challenge – Project No: 1)

An early entry for the April challenge under the banner of “build or assemble something”. This was not my planned entry, details of which will follow later in the month, this one was an accident.  Let me explain.

For quite a while now I have wanted to attempt a plastic kit.  I reckon it must have been the best part of 45 years ago when I last did one.  Why?  Because I loved the look of some them all those years ago, as indeed I do to-day, but I simply don’t enjoy making them.  My willingness to have another go was fuelled by my desire to try to encourage my model club who are well into such kits to base them, even simply as is the case with this one.  The passage of time also helped, it couldn’t have been that bad all those years ago could it?  Alas it was and readers of earlier posts will be aware that this little project was in danger of going tits up and being abandoned altogether.  Then the April challenge got me refocused on getting it done.  I figured if I was going to do it then I might as well kill two birds with one stone.

Pictures of the completed piece appear below and the eagle-eyed amongst you might notice that there are no “in progress images”.  There is a reason for this.

As I have mentioned previously I am not a vehicle kit person chiefly because me and glue simply do not see eye to eye.  I was dreading the build rather than looking forward to the challenge that lay ahead.  Nevertheless I was determined to complete the exercise come hell or high water but had no desire to record this momentous step by taking progress photos of deformed plastic covered in blobs of glue.

So how did it go?  Better than I thought but not great.  Were my worst fears justified?  Not the worst ones but the ones just below the worst ones.

The first issue I had was shortly after I opened the box and started to assemble the kit.  It turns out this Rubicon kit can be assembled into one of four configurations.  Being a man I don’t tend to read instructions so this point initially passed me by.  However, I got lucky.  I wanted to build the US version and without realising it this is the one I had started on when I discovered all the additional parts that I couldn’t work out what to do with.  Score – 1.

After eventually reading the instructions, assembly to be fair was pretty straight forward and the fit of parts were good, not that I have much previous experience on which to judge this.  I even managed to think to paint areas before assembly and to add things like mud to the wheel arches before fixing the wheels themselves in place.  Score + 1.

Unfortunately some things hadn’t changed, I’m still heavy-handed with glue.  As light a touch as I might have with a brush the complete opposite is true with glue.  Alas trying to apply super glue with a modelling brush which would be the ideal solution for me is simply a way of ruining a brush.  So, crucially glue everywhere, Score – 10!

I had hoped the figures would be my saving grace and although they were OK the faces left a lot to be desired.  I’ve been lucky of late in that a lot of the miniatures I have been working on have been superbly sculpted and the expressions on the faces have been simply awesome.  As a consequence I have been able to get away with my painting skills.  Unfortunately the faces of these figures were plain, very flat and featureless and although I felt I made the most of them the end result still left a lot to be desired.  Score + 1.

Final assembly of the kit including the figures went together better than I had hoped but for one error.  I’m not sure if the error is with the kit or with my assembly.  Having googled some images of completed kits done by others I think I can be certain the error is mine but quite where I went wrong I’m not sure.  The error in question is with the rear sitting down soldier and the way he is holding his rifle.  He’s holding it far to low down and although I was aware of this at the time I simply couldn’t get it higher and get the figure sitting in the back of the jeep.  Still that’s why I’m The Imperfect Modeller!  Score – 1.

On to something positive, the base work.  Now there is nothing much to the base, it’s all pretty basic and that was the intention, to keep it simple as a demonstration piece for presentation at the club.  However, if there is one thing I have learnt, albeit with room for improvement, it is how when creating dioramas and vignette bases to cover up errors!  With a considerable effort I pretty much managed to conceal excess glue thanks to some weathering, decals, ground work and opting to lay the windscreen flat to the point where the overall model just about looks OK.  Score 10 – not entirely merited but brings the overall score to 0 which feels just about right.

In summary, did I enjoy the experience?  No.  Will I venture into a kit build again in the future?  Only if the wife is present to tell me to read the bloody instructions or if I can learn how to better apply glue!

Conclusion?  Never say never but if I did embark on another kit then I would only do so if I was drunk!

TIM

DSC_0804 (1)DSC_0802 (1)DSC_0821DSC_0801 (1)DSC_0827DSC_0803 (1)

 

10 thoughts on “TIM’s Memory Monday (No: 41)

  1. Oh mate, if we don’t find a way for you to overcome this aversion to glue I don’t know how I’m going to turn you into a converter! I do enjoy assembling miniatures, both the creative off-piste side of things with kitbashing (as opposed to piste-off which seems to be how it affected you) and the straightforward, “stick part A to part B and keep going until the piece is finished”. That said I do struggle with fiddly components, I’ve got hands like the front end of a JCB, I’m not built for gluing together two components when each is half the size of an atom. I used to not bother with the instructions either but modern kits are extremely unforgiving of that so sometimes needs must! Anyway, despite all the trials you faced the end result looks good and that’s the main thing. 🙂

    Liked by 2 people

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s